电邮这篇文章 Fatigue Testing Method for Thin Wires
- 作者: Aksenov O.I.1, Fuks A.A.1,2, Volkov N.A.1, Aronin A.S.1
-
隶属关系:
- Institute of Solid-State Physics, Russian Academy of Sciences
- National Research University Higher School of Economics Russia
- 期: 编号 3 (2023)
- 页面: 121-124
- 栏目: ЛАБОРАТОРНАЯ ТЕХНИКА
- URL: https://rjdentistry.com/0032-8162/article/view/670528
- DOI: https://doi.org/10.31857/S0032816223020015
- EDN: https://elibrary.ru/UXDSHZ
- ID: 670528
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Within the framework of this work, a new method for tensile fatigue testing of thin microwires and wires has been developed in accordance with GOST 25.502-79. The developed method has been tested on amorphous microwires of composition Fe77.5Si7.5B15 in glass insulation. It has been established that the deformation mode in the stress range from 0 to 700 MPa corresponds to the long-term use of the studied microwires (millions of cycles). In addition, the studied microwires are capable of withstanding hundreds of thousands of tensile cycles at stresses from 700 to 1100 MPa.
作者简介
O. Aksenov
Institute of Solid-State Physics, Russian Academy of Sciences
Email: oleg_aksenov@inbox.ru
Moscow oblast, 142432, Chernogolovka, Russia
A. Fuks
Institute of Solid-State Physics, Russian Academy of Sciences; National Research University Higher School of Economics Russia
Email: oleg_aksenov@inbox.ru
Moscow oblast, 142432, Chernogolovka, Russia; 109028, Moscow, Russia
N. Volkov
Institute of Solid-State Physics, Russian Academy of Sciences
Email: oleg_aksenov@inbox.ru
Moscow oblast, 142432, Chernogolovka, Russia
A. Aronin
Institute of Solid-State Physics, Russian Academy of Sciences
编辑信件的主要联系方式.
Email: oleg_aksenov@inbox.ru
Moscow oblast, 142432, Chernogolovka, Russia
参考
- Vazquez M., Gomez-Polo C., Chen D.-X., Hernando A. // IEEE Transactions on Magnetics. 1994. V. 30. P. 907. https://doi.org/10.1109/20.312442
- Churyukanova M., Kaloshkin S., Shuvaeva E., Stepashkin A., Zhdanova M., Aronin A., Aksenov O., Arakelov P., Zhukova V., Zhukov A. / Journal of Alloys and Compounds. 2018. V. 748. P. 199. https://doi.org/10.1016/j.jallcom.2018.02.342
- Vazquez M., Andenote-Engelvin A.-L. // Journal of Magnetism and Magnetic Materials. 2009. V. 321. P. 2066. https://doi.org/10.1016/j.jmmm.2008.10.040
- Aksenov O.I., Abrosimova G.E., Aronin A.S., Orlova N.N., Churyukanova M.N., Zhukova V.A., Zhukov A.P. // Journal of Applied Physics. 2017. V. 122. P. 235103. https://doi.org/10.1063/1.5008957
- Luborsky F. Amorphous Metallic Alloys. London: Butterwoths, 1983.
- ГОСТ 25.502-79 Расчеты и испытания на прочность в машиностроении. Методы механических испытаний металлов. Методы испытаний на усталость. М. Стандартинформ, 2005.
- Костин П.П. Физико-механические испытания металлов, сплавов интерметаллических материалов. М.: Машиностроение, 1990.
- Аксенов О.И., Орлова Н.Н., Аронин А.С. // ПТЭ. 2019. № 5. С. 135. https://doi.org/10.1134/S0032816219050136
- Bansal N.P., Doremus R.H. Handbook of Glass Properties. Amsterdam: Elsevier LTD, 1986.
补充文件
