Development of Domestic Scientific Trends in the Field of Wood-Based Materials

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

The article presents a comprehensive analysis of the development of domestic scientific trends in the field of wood-based materials for the period 2012–2025. On the basis of dissertation research data, the clustering of topics, assessment of the dynamics of scientific activity, geographical distribution and interdisciplinary links is carried out. Key trends were identified: the dominance of wood processing technologies (48–65% of works), the growth of environmental research (up to 30% by 2025). Special attention is paid to the role of leading scientific schools and their contribution to the development of composite materials, chemical and thermo-modification of wood raw materials, research of structure and properties of wood-based materials. The analysis of dissertation research from 2012 to 2025 demonstrates the evolution from classical wood science to interdisciplinary and environmentally oriented approaches. In 2012–2015 there was a shift towards applied tasks. In 2016–2019, the technological orientation (energy saving, waste utilization) and ecologization of research intensified. From 2020, the focus has shifted to sustainable use of resources, development of recycling technologies and growth of interdisciplinary projects combining chemistry, building materials science, technology, ecology and economics. Despite the progress, there is still a need to develop effective ways to modify wood raw materials for the production of building materials resistant to biotic and abiotic environmental factors.

Full Text

Restricted Access

About the authors

I. V. Stepina

National Research Moscow State University of Civil Engineering

Author for correspondence.
Email: sudeykina@mail.ru

Candidate of Sciences (Engineering)

Russian Federation, 26, Yaroslavskoe Hwy, Moscow, 129337

References

  1. Chubinsky A.N., Varankina G.S. Justification of the plywood gluing technology with modified glue. Izvestiya of the St. Petersburg Forestry Academy. 2012. No. 201, pp. 185–192. (In Russian). EDN: RIVSGT
  2. Chubinsky A.N., Varankina G.S. Formation of low-toxic particleboards and with the use of modified adhesives. Izvestiya of Higher Educational Institutions. Lesnoj Zhurnal. 2013. No. 6, pp. 67–73. (In Russian). EDN: RPVELL
  3. Varankina G.S., Chubinsky A.N. Justification of the mechanism of modification of phenol- and urea-formaldehyde adhesives by shungite sorbents. Vestnik of the Moscow State Forest University – Forest Bulletin. 2014. No. 2 (101), pp. 108–112. (In Russian). EDN: RZCBSB
  4. Chauzov K.V., Varankina G.S. Investigation of the process of gluing larch wood with composite adhesive. Izvestiya of the St. Petersburg Forestry Academy. 2014. Vol. 208, pp. 111–120. (In Russian). EDN: THIVBX
  5. Ugryumov S.A., Fedotov A.A. Assessment of the influence of technological factors on the properties of chipboard based on furan resin. Vestnik of the Volga State Technological University. Series “Forest. Ecology. Nature Management”. 2012. No. 2 (16), pp. 36–42. (In Russian). EDN: PRGRQD
  6. Fedotov A.A., Ugryumov S.A. Investigation of properties of particleboards based on synthetic resins with different proportion of furan resin additive. Klei. Germetiki. Texnologii. 2012. No. 12, pp. 16–19. (In Russian). EDN: PZFVIP
  7. Fedotov A.A., Ugryumov S.A. Investigation of physical and mechanical characteristics of three-layer particleboards with layer-by-layer binder combination. Klei. Germetiki. Texnologii. 2012. No. 11, pp. 21–24. (In Russian). EDN: PZFVET
  8. Kozhevnikov D.A., Ugryumov S.A. Evaluation of adhesion performance of adhesive compositions based on urea-formaldehyde oligomer modified with alcohols in relation to the production of wood boards. Klei. Germetiki. Texnologii. 2011. No. 12, pp. 26–29. (In Russian). EDN: ONHWXP
  9. Kozhevnikov D.A., Ugryumov S.A. Production technology of wood-based panels based on combined fillers. Vestnik of the Moscow State Forest University – Forest Bulletin. 2012. No. 2, pp. 139–144. (In Russian). EDN: OWEJZZ
  10. Ugryumov S.A., Kozhevnikov D.A. Estimation of wetting ability of alcohol-modified adhesive compositions in relation to the production of glued wood materials. Klei. Germetiki. Texnologii. 2012. No. 7, pp. 24–26. (In Russian). EDN: PAZTTB
  11. Ugryumov S.A., Sveshnikov A.S. Estimation of adhesive strength and interfacial interaction in the structure of plywood with inner layers of wood-glue composition. Vestnik of PSTU. Series: Forest. Ecology. Nature Management. 2014. No. 1 (21), pp. 53–61. (In Russian). EDN: RXHHGT
  12. Sveshnikov A.S., Ugryumov S.A. Technology of composite plywood production. Vestnik of the Moscow State Forest University – Forest Bulletin. 2012. No. 2, pp. 148–153. (In Russian). EDN: OWEKAT
  13. Ugryumov S.A., Sveshnikov A.S. Comprehensive study of composite plywood properties. Vestnik of the Moscow State Forest University – Forest Bulletin. 2010. No. 6, pp. 163–165. (In Russian). EDN: NCGCSD
  14. Dozhdikov S.A., Shishlov O.F., Glukhikh V.V., Stoyanov O.V. Influence of the technological factors on the properties of particleboards with cardanol-containing polyurethane adhesive. Klei. Germetiki. Texnologii. 2014. No. 10, pp. 27–32. (In Russian). EDN: STAKZH
  15. Shishlov O.F., Dozhdikov S.A., Glukhikh V.V., Stoyanov O.V. Study of the influence of cardanol content on the properties of phenol cardanol formaldehyde novolac resins. Klei. Germetiki. Texnologii. 2013. No. 5, pp. 15–18. (In Russian). EDN: PZFVWV
  16. Shishlov O.F., Dozhdikov S.A., Glukhikh V.V., Stoyanov O.V. Analysis of the influence of cardanol content on the properties of phenol-cardanol-formaldehyde novolac resins. Polymer Science, Series D. 2014. Vol. 7. No. 1, pp. 61–64. EDN: SKNFAX. https://doi.org/10.1134/S1995421214010109
  17. Shishlov O.F., Dozhdikov S.A., El’tsov O.S., Ulomskiy E.N., Glukhikh V.V., Stoyanov O.V. Study of synthesis of bromo derivatives of cardanol and their effectiveness as fire retardants for wood materials. Vse materialy. Entsiklopedicheskiy Spravochnik. 2013. No. 10, pp. 47–55. (In Russian). EDN: RDOPCX
  18. Shishlov O.F., Dozhdikov S.A., El’tsov O.S., et al. Synthesis of brominated cardanol derivatives and their effeciency as fire retardants for wood. Polymer Science, Series D. 2014. Vol. 7. No. 3, pp. 238–245. EDN: WVVZSR. https://doi.org/10.1134/S1995421214030186
  19. Pichugin A.P., Batin M.O., Banul V.V. Floors from the materials modified by polymer compositions in agriculture. Stroitel’nye Materialy [Construction Materials]. 2012. No. 8, pp. 80–82. (In Russian). EDN: NSYWIW
  20. Pichugin A.P., Banul V.V., Batin M.O. Persistence of thermally sprayed polymer coatings in the environments of livestock buildings. Stroitel’nye Materialy [Construction Materials]. 2013. No. 10, pp. 26–30. (In Russian). EDN: RFYBHZ
  21. Eisenstadt A.M., Makhova T.A., Frolova M.A., Tutigin A.S., Stenin A.A., Popova M.A. Designing the composition of nano- and microstructured building composite materials. Promyshlennoye i Grazhdanskoye Stroitel’stvo. 2012. No. 10, pp. 26–30. (In Russian). EDN: PFGICD
  22. Koteneva I.V., Kotlyarova I.A., Sidorov V.I., Kononov G.N. Thermodestruction of wood in the presence of borazote compounds. Vestnik MGSU. 2010. No. 2, pp. 198–203. (In Russian). EDN: MUXQJT
  23. Koteneva I.V., Kotlyarova I.A., Sidorov V.I., Ermachkova N.A. Increase in the adhesion of acrylic coatings to the wood surface. Vestnik MGSU. 2010. No. 4–1, pp. 121–127. (In Russian). EDN: NEJDOV
  24. Ugryumov S.A., Fedotov A.A., Osetrov A.V. Complex ways to improve the physical and mechanical properties of particleboard. Vestnik of the Volga State Technological University. Series Forest. Ecology. Nature Management. 2015. No. 1 (25), pp. 34–44. (In Russian). EDN: TNJLEN
  25. Ugryumov S.A., Osetrov A.V. Investigation of curing processes of modified phenol-formaldehyde resin. Klei. Germetiki. Texnologii. 2015. No. 5, pp. 32–34. (In Russian). EDN: TSXTEV
  26. Osetrov A.V., Ugryumov S.A. Estimation of activation energy of modified phenol formaldehyde resin. Klei. Germetiki. Texnologii. 2015. No. 7, pp. 27–29. (In Russian). EDN: TZWPJJ
  27. Ugolev B.N., Gorbacheva G.A., Belkovsky S.Yu., et al. Experimental studies of the influence of nanostructural changes in wood on its deformability. Vestnik of the Moscow State Forest University – Forest Bulletin. 2012. No. 7 (90), pp. 124–127. (In Russian). EDN: PCZSEF
  28. Ugolev B.N., Gorbacheva G.A., Belkovsky S.Yu. Experimental study of the indicators of the wood memory effect. Vestnik of the Moscow State Forest University – Forest Bulletin. 2014. Vol. 18. No. 2, pp. 66–69. (In Russian). EDN: RZCBOF
  29. Ugolev B.N., Gorbacheva G.A., Belkovsky S.Yu. Multiform wood memory effect. Vestnik of the Moscow State Forest University – Forest Bulletin. 2014. Vol. 18. No. 2, pp. 62–66. (In Russian). EDN: RZCBOP
  30. Bakhshieva M.A., Chubinsky A.N. Analysis of the structure and properties of juvenile wood. Izvestiya St. Petersburg Forestry Academy. 2016. Vol. 215, pp. 202–214. (In Russian). EDN: WAXWDT. https://doi.org/10.21266/2079-4304.2016.215.202-214
  31. Longitude F., Mote F., Bakhshieva M.A., Chubinsky A.N., Tambi A.A., Charpentier P., Bombardier V. Study of the process of identification of tree species by macroscopic features using computer tomography. Izvestiya St. Petersburg Forestry Academy. Iss. 202. 2013, pp. 158–167. (In Russian). EDN: RDPKQD
  32. Stepina I.V., Sidorov V.I., Klyachenkova O.A. Modification of cellulose surface by monoethanolamine(N→B)phenylborate according to RFES. Khimiya Rastitel’nogo Syr’ya. 2014. No. 3, pp. 93–97. (In Russian). EDN: TGUEYB
  33. Khasanshin R.R., Safin R.R., Razumov E.Y. High temperature treatment of birch plywood in the sparse environment for the creation of a waterproof construction veneer. Procedia Engineering. 2016. Vol. 150, pp. 1541–1546. EDN: XFIADZ. https://doi.org/10.1016/j.proeng.2016.07.108
  34. Safin R.R., Khasanshin R.R., Timerbaeva A.L., Safina A.V. Study of the physical and energy properties of fuel granules based on a termomodified wood raw material. Journal of Engineering Physics and Thermophysics. 2015. Vol. 88. No. 4, pp. 958–961. EDN: YULMPH. https://doi.org/10.1007/s10891-015-1270-y
  35. Galyavetdinov N.R., Khasanshin R.R., Safin R.R., Safin R.G., Razumov E.Y. The usage of wood wastes in the manufacture of composite materials. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. 2015, pp. 779–786. EDN: JVNYTC. https://doi.org/10.5593/SGEM2015/B41/S18.101
  36. Safin R.R., Khasanshin R.R., Shaikhutdinova A.R., Ziatdinov R.R. The technology for creating of decorative plywood with low formaldehyde emission. IOP Conference Series: Materials Science and Engineering. 2015. Vol. 93. No. 1. 012077. EDN: VALGXD. https://doi.org/10.1088/1757-899X/93/1/012077
  37. Safin R.R., Khasanshin R.R., Shaikhutdinova A.R., Safina A.V. Research of heating rate while thermo modification of wood. World Applied Sciences Journal. 2014. Vol. 30. No. 11, pp. 1618–1621. EDN: SKNMTH. https://doi.org/10.5829/idosi.wasj.2014.30.11.14223
  38. Sharapov E.S., Smirnova E.V., Toropov A.S. Comparative analysis of the performance of devices for determining the properties of wood by measuring the resistance to drilling. Izvestiya St. Petersburg Forestry Academy. 2018. No. 225, pp. 188–201. (In Russian). EDN: YQHCNN. https://doi.org/10.21266/2079-4304.2018.225.188-201
  39. Sharapov E.S., Chernov V.Yu., Toropov A.S., Smirnova E.V. Moisture influence on the accuracy of wood properties determination by the method of measuring the drilling resistance. Izvestiya of Higher Educational Institutions. Forestry Journal. 2016. No. 2 (350), pp. 103–113. (In Russian). EDN: VYWQJR. https://doi.org/10.17238/issn0536-1036.2016.2.103
  40. Yatsun I.V., Gorokhovsky A.G., Odintseva S.A. Investigation of physical-mechanical and radioprotective properties of wood-composite laminated material “Fanotren B”. Izvestiya of Higher Educational Institutions. Forestry Journal. 2019. No. 3 (19), pp. 110–120. (In Russian). EDN: BBQHKC. https://doi.org/10.17238/issn0536-1036.2019.3.110
  41. Yatsun I.V., Vetoshkin Yu.I., Shishkina S.B. Application of wood processing waste in the manufacture of structural materials with specific properties. Lesotekhnicheskii Zhurnal. 2014. Vol. 4. No. 3 (15), pp. 220–229. (In Russian). EDN: UHNOWX. https://doi.org/10.12737/6294
  42. Kilyusheva N.V., Eisenstadt A.M., Danilov V.E., Belyaev A.O. Wood modification with organomineral complex. Promyshlennoe i Grazhdanskoe Stroitel’stvo. 2020. No. 2, pp. 47–51. (In Russian). EDN: VXEUZS. https://doi.org/10.33622/0869-7019.2020.02.47-51
  43. Khantimirov A.G., Abdrakhmanova L.A., Nizamov R.K., Khozin V.G. Wood-polymer composites based on polyvinyl chloride reinforced with basalt fiber. Izvestiya of the Kazan State University of Architecture and Civil Engineering. 2022. No. 3 (61), pp. 75–81. EDN: IHYITF. (In Russian). https://doi.org/10.52409/20731523_2022_3_75
  44. Khantimirov A.G., Abdrakhmanova L.A., Khozin V.G. Filling of wood-polymer composites with basalt fibers. Izvestiya of Higher Educational Institutions. Construction. 2022. No. 10, pp. 5–13. (In Russian). EDN: VHVDPD. https://doi.org/10.32683/0536-1052-2022-766-10-5-13
  45. Khantimirov A.G., Abdrakhmanova L.A., Nizamov R.K., Khozin V.G. Study of properties of nanomodified wood-polymer composites based on polyethylene. Nanotekhnologii v Stroitel’stve. 2023. Vol. 15. No. 2, pp. 110–116. (In Russian). EDN: HCMIRC. https://doi.org/10.15828/2075-8545-2023-15-2-110-116
  46. Mamontov S.A., Kiseleva O.A., Druzhinina V.P. Thermal and light aging of wood-fiber boards. ACADEMIA. Arkhitektura i Stroitel’stvo. 2014. No. 1, pp. 94–97. (In Russian). EDN: SNEUMR
  47. Stepina I.V., Sodomon M. Compatibility of modified plant raw materials with organopolymer binders. Stroitel’nye Materialy [Construction Materials]. 2022. No. 11, pp. 92–96. (In Russian). EDN: MEPYIZ. https://doi.org/10.31659/0585-430X-2022-808-11-92-96
  48. Stepina I.V., Sodomon M. Biostable plant composite for thermal insulation. Stroitel’stvo i Rekonstrukciya. 2022. No. 5 (103), pp. 115–123. (In Russian). EDN: HSYYRE. https://doi.org/10.33979/2073-7416-2022-103-5-115-123
  49. Stepina I.V., Sodomon M., Kruk A.A., Solovieva E.S. Thermodestruction of stems of Sosnovsky’s burshevik modified with monoethanolamine(N→B)-trihydroxyborate. Stroitel’stvo i Rekonstrukciya. 2024. No. 1, pp. 109–116. (In Russian). EDN: WBKPDF. https://doi.org/10.33979/2073-7416-2024-111-1-109-116
  50. Evdokimov N.V., Midukov N.P., Kurov V.S. Biorefining of wood-fibre raw material in a material composition for additive technologies. Fiber Chemestry. 2023. No. 1, pp. 66–72. EDN: SHBNOW. https://doi.org/10.1007/s10692-023-10426-6
  51. Evdokimov N.V., Midukov N.P., Kurov V.S., Staricin M.V., Petrov S.N. Microstructure of fibers in a feedstock composition for use in additive technologies. Fiber Chemistry. 2022. No. 3. Vol. 54, pp. 181–184. EDN: NASEAW. https://doi.org/10.1007/s10692-022-10371-w
  52. Fedyukov V.I., Chernov V.Yu., Chernova M.S., Tsoi O.V. Resonance acoustic and colorimetric characteristics of wood from retrofits. Izvestiya of Higher Educational Institutions. Forestry Journal. 2022. No. 6, pp. 164–177. (In Russian). EDN: DHMMCO. https://doi.org/10.37482/0536-1036-2022-6-164-177
  53. Fedyukov V.I., Saldaeva E.Y., Chernova M.S. Targeted use of resonant wood in old structures. Standarty i Kachestvo. 2021. No. 7, pp. 52–55. (In Russian). EDN: GBLYFV. https://doi.org/10.35400/0038-9692-2021-7-52-55
  54. Russu A.V., Shamaev V.A., Zimelis A. Cracking of natural and pressure-modified birch wood (Betula pendula Roth): the effect of the internal friction index under the influence of external disturbances. Lesotekhnicheskiy Zhurnal. 2023. Vol. 13. No. 3 (51), pp. 219–235. EDN: GICJMG. https://doi.org/10.34220/issn.2222-7962/2023.3/15
  55. Shamaev V.A., Medvedev I.N., Russu A.V. Regimes of impregnation of pine wood assortments with oily antiseptics. Izvestiya of Higher Educational Institutions. Forestry Journal. 2023. Vol. 13. No. 6 (54), pp. 136–148. (In Russian). EDN: HEKSNA. https://doi.org/10.37482/0536-1036-2023-6-136-148
  56. Belchinskaya L.I., Zhuzhukin K.V., Novikova L.A., Dmitrenkov A.I., Sedliachik J. Effect of spent engine oil with additives on water and bioresistance of birch and pine wood. Lesotekhnicheskiy Zhurnal. 2018. Vol. 8. No. 2, pp. 196–204. EDN: PWZIFX. (In Russian). https://doi.org/10.12737/article_5b2406191848a1.09510619
  57. Saushkin V.V., Matveev N.N., Postnikov V.V., Kamalova N.S., Lisitsyn V.I., Evsikova N.Yu., Zhuzhukin K.V., Nguyen H.T. Study of the effect of pulsed magnetic field and adsorbed water on the properties of wood by infrared spectroscopy. Lesotekhnicheskiy Zhurnal. 2018. Vol. 8. No. 2 (30), pp. 222–232. (In Russian). EDN: USUVEW. https://doi.org/10.12737/article_5b24061b468a19.01199073
  58. Belykh S.A., Novoselova Yu.V., Kudyakov A.I. Liquid glass from microsilica as a binder in obtaining a fire retardant composition for wood. Sistemy. Metody. Tekhnologii. 2016. No. 4 (32), pp. 154–160. (In Russian). EDN: XEEOBD. https://doi.org/10.18324/2077-5415-2016-4-154-160
  59. Belykh S.A., Novoselova Yu.V., Novoselov D.A., Kudyakov A.I. Structure formation of liquid-steel compositions for wood protection against fire. Sistemy. Metody. Texnologii. 2017. No. 3 (35), pp. 80–86. (In Russian). EDN: ZGZGRF. https://doi.org/10.18324/2077-5415-2017-3-80-86

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2. Fig. 1. Distribution by thematic clusters of dissertation works performed in the period from 2012 to 2015

Download (84KB)
Indexing metadata
3. Fig. 2. Distribution of dissertation works by thematic clusters (2012–2015)

Download (68KB)
Indexing metadata
4. Fig. 3. Distribution of scientific specialties within the materials and materials science cluster (2012–2015)

Download (239KB)
Indexing metadata
5. Fig. 4. Geography of research centers in the area of wood materials and materials science (2012–2015)

Download (906KB)
Indexing metadata
6. Fig. 5. Distribution by thematic clusters of dissertation works performed in the period from 2016 to 2019

Download (89KB)
Indexing metadata
7. Fig. 6. Distribution of dissertation works by thematic clusters (2016–2019)

Download (67KB)
Indexing metadata
8. Fig. 7. Distribution of scientific specialties within the materials and materials science cluster (2016–2019)

Download (163KB)
Indexing metadata
9. Fig. 8. Geography of research centers in the direction of wood materials and materials science (2016–2019)

Download (636KB)
Indexing metadata
10. Fig. 9. Distribution by thematic clusters of dissertation works performed in the period from 2020 to 2025

Download (82KB)
Indexing metadata
11. Fig. 10. Distribution of dissertation works by thematic clusters (2020–2025)

Download (70KB)
Indexing metadata
12. Fig. 11. Distribution of scientific specialties within the materials and materials science cluster (2020–2025)

Download (165KB)
Indexing metadata
13. Fig. 12. Geography of research centers in the direction of wood-based materials and materials science (2020–2025)

Download (827KB)
Indexing metadata

Copyright (c) 2025 ООО РИФ "СТРОЙМАТЕРИАЛЫ"